A:The methods to improve the output of the extruder through the process parameter setting are: moderately increase the screw speed, optimize the heating temperature of each section to enhance the plastic fluidity, adjust the appropriate screw compression ratio, control the head pressure, accelerate the cooling speed, improve the feeding method, and ensure uniform and continuous, while taking into account product quality and equipment performance.
The principle of oxygenation is to use Roots blower to press air into the gas pipeline, send it into nanotubes, and disperse it into the water in the form of microbubbles. The microbubbles float from the bottom to the top, so that oxygen is fully dissolved in the water. At the same time, it can also cause the rotation and up and down flow of the water flow, so that the oxygen-rich water in the upper layer of the pond is brought to the bottom layer, so as to achieve uniform oxygenation of the pool water.
The energy consumption in the wood-plastic production process can be reduced to a certain extent by using appropriate additives. In practical applications, reasonable formula design and optimization are required according to specific production processes and product requirements. Yongte is professional manufacturer for complete WPC production machines, we supply turn-key project service from A to Z, we will provide good formula to customer and help customer to improve the formula according to customer's raw material and production situation. we welcome customers visit our factory for checking our wpc machines.
In the production of wood plastic WPC products, the energy saving is very important for reducing the production cost. Yongte machine is good designed for energy saving, yongte wood miller adopts low power consumption and high capacity grinding system, Yongte mixer machine equip with inverter control for main motor, Yongte WPC extruders equip with inverter control and automatic temperature control system.Yongte WPC machine equip with high effective extrusion system and high speed calibration system to increase the production speed. Yongte provide good WPC production formulation which can ensure high speed and high quality stably production. all these improvements of Yongte WPC machine helps to save 30-50% energy consumption.
A:Vacuum discharge of twin-screw extruder is an important link. By vacuuming, the gas and volatiles in the material can be removed. This helps to improve product quality and reduce bubbles and blemishes. The vacuum system can optimize the extrusion process, make the material more dense and uniform, and is widely used in the production of plastics, rubber and other industries.
A:Plastic central feeding system plays a prominent role. It centrally stores and manages plastic raw materials, automatically feeds them accurately, and ensures consistent product quality. It can dry raw materials, optimize treatment, save space, and handle dust. The system saves energy and reduces consumption, improves production efficiency, reduces manual operation, and makes plastic processing more intelligent and efficient.
