Daily Maintenance of plastic mixer machine
The daily maintenance and care of the mixer is very important. It can extend the service life of the equipment and ensure the stable production. The following are the daily maintenance and care points of the mixing equipment:
1. Cleaning
After each use, the residual materials in the mixing pot should be cleaned in time to prevent the materials from agglomerating and affecting the mixing effect next time. You can use special cleaning tools, such as shovels, brushes, etc., to clean the materials in the pot.
Clean the dust and dirt on the outside of the mixing pot to keep the appearance of the equipment neat and tidy.
2. Check the parts
Regularly check the wear of the stirring blades. If the blades are found to be severely worn, they should be replaced in time. Worn blades will affect the mixing effect and may even cause equipment failure.
Check the transmission device, including motors, reducers, etc., to ensure that they are operating normally without abnormal noise and vibration. If there are any problems, they should be repaired or replaced in time.
Check the heating and cooling system to ensure that the pipelines are unobstructed and there is no leakage. The normal operation of the heating and cooling system is essential for the mixing temperature control of the materials.
3. Lubrication and maintenance
Regularly lubricate the stirring shaft, reducer and other parts, and use appropriate lubricating oil or grease to ensure smooth operation of the equipment. Lubrication maintenance can reduce equipment wear and extend the service life of the equipment.
