Yongte plastic pipe cutting machine is mainly matched with plastic extruder, mainly used in plastic PVC, PE, PC pipe and profile-shaped plastic products such as automatic production line. The equipment adopts advanced imported frequency conversion technology and PLC programming technology to achieve precise control of each mechanical transmission part. At the same time, the motor and electrical action are equipped with perfect protection measures, and the cutting process is configured with counterweight, which greatly improves the smoothness of operation.
First, the structure principle
Chip-free cutting machines play a key role in pipe cutting. The frame mobile saw table can move in the extrusion direction during the cutting process and always keep pace with the pipe. The front and rear ends of the machine are equipped with tug devices, which can be flexibly adjusted for different pipe diameters. When the travel switch or encoder sends out the cutting signal, the clamping device of the machine is an aluminum Haff block, which can be exchanged according to different specifications of the pipe.
The cutting plate of the cutting device is driven in the synchronous direction of the cylinder, and the chip feed is completed by the slow advance of the piston cylinder rod. The size of the cylinder thrust can be effectively controlled by the gas principle regulating valve. The position rotation of the cutting sheet is driven by the motor device, and its rotation is supported by the main shaft bearing to ensure that the rotation center is always unchanged, so that the end face of the cut pipe is smooth, the size is standardized, and the cutting depth can be adjusted very freely.
Two, maintenance
1. When operating the cutting machine, be sure to concentrate on it, keep your mind clear, and operate the power tools with a rational attitude. Only in this way can we ensure the accuracy and safety of the operation.
2. The safety of the power line is crucial. It is strictly prohibited to pull the wire without permission, and the power cord should be placed reasonably to prevent it from being accidentally cut off. Before using the device, you must carefully check the performance of the device to ensure that all components are intact to provide a solid guarantee for the normal operation of the device.
3. Wearing suitable work clothes is an important part of safe operation. Do not wear too loose clothing, jewelry or long hair. At the same time, do not wear gloves and do not buckle the cuffs to avoid danger.
4. The workpiece must be firmly clamped. In the case of workpiece clamping is not tight, it is strictly prohibited to start cutting, otherwise it may lead to serious safety accidents.
5. Do not repair the burrs of the grinding parts on the grinding wheel plane, which is easy to break the grinding wheel and bring great danger to the operator.
6. When cutting, the operator must deviate from the front of the grinding wheel and wear protective glasses to protect the eyes from injury.
It is strictly prohibited to use the existing incomplete grinding wheel, pay attention to prevent Mars from splashing when cutting, and stay away from flammable and explosive materials to ensure the safety of the working environment.
Third, cleaning and maintenance
1. In order to avoid damage to the equipment, the dust and debris on the cutting machine should be cleaned in time. Keeping the equipment clean helps to extend the service life of the equipment.
2. For the parts that are easy to accumulate ash such as the guide rail of the machine tool, you can use air tools and wiping cloth for cleaning. However, during the cleaning process, be sure to prevent electrical components from being damp and contaminated to ensure the normal operation of the equipment.
3. Regularly check whether the oil in the lubrication system is precipitated, and timely clean the valve body or oil passage to prevent the valve from getting stuck, precipitated and blocked. A good lubrication system is the key to the normal operation of the equipment.
4. When cleaning the cooling system, check whether the pump, water pipe, etc., is blocked. After cleaning, the residual water inside the water pipe should be discharged in time to prevent the water pipe from rusting or blocking.
5. If conditions permit, the cutting machine can be fully washed regularly to ensure the health of the cutting machine equipment. This can not only improve the working efficiency of the equipment, but also extend the service life of the equipment.
