The following steps should be followed to use the plastic mixer correctly:
1. Check before starting
- Check whether the appearance of the equipment is damaged and whether all the connection parts are tight.
- Confirm that the stirring device rotates flexibly without jamming.
- Check the electrical system to ensure that the line connection is normal and there is no short circuit or other faults.
2. Adding materials
- Accurately weigh various plastic raw materials according to the process requirements and formula ratio.
- Add raw materials with large quantity or large specific gravity first, and then add raw materials with small quantity or small specific gravity.
3. Setting parameters
- Set the appropriate stirring speed and mixing time according to the characteristics of the raw materials and mixing requirements.
4. Start the equipment
- Press the start button to start the mixer.
5. Operation monitoring
- During the mixing process, closely observe the operation of the equipment, including whether the rotation of the stirring device is normal, and whether there is abnormal noise and vibration.
6. Discharging
- When the set mixing time is reached, stop the equipment.
- Open the discharge port and discharge the evenly mixed materials.
7. Cleaning and maintenance
- After each use, clean the residual materials inside the mixer in time to keep the equipment clean.
- Regularly check and replace wearing parts, such as stirring blades, seals, etc.
8. Safety precautions
- Operators should be familiar with the operating procedures of the equipment and are strictly prohibited from illegal operations.
- When the equipment is running, it is forbidden to put your hands into the mixer.
In short, the correct use of the plastic mixer requires strict compliance with the operating procedures, while paying attention to the maintenance and care of the equipment to ensure its stable performance and service life.
Yongte is professional manufacturer for Plastic machines, Yongte plastic mixer machine is specially designed according to customer's material and production needs.
