Rubber nano seepage pipe is a pipe with special properties, which is widely used in agricultural irrigation, gardening and other fields.
Here are some general precautions when using rubber nano seepage pipe:
1. Pre-installation inspection: Before installation, check whether the nano seepage pipe has defects such as damage and deformation to ensure its quality is intact.
2. Reasonable layout: According to irrigation needs and site conditions, the layout of the seepage pipe should be reasonably planned to ensure that water can penetrate evenly into the required area.
3. Avoid excessive bending: Although rubber has a certain degree of flexibility, excessive bending of nano seepage pipes should be avoided to avoid affecting its water seepage performance and service life. Do not use it in an extremely bent state near metal parts (joints), and try to avoid extreme bending near metal parts, which can be avoided by using elbows, etc.
4. Correct connection: Make sure the connection parts are tight to prevent water leakage. You can refer to the following assembly precautions:
- Choose a connector that fits the size of the hose;
- When inserting the tail of the connector into the hose, apply oil to the hose and the tail. Do not burn it with fire. If it cannot be inserted, heat the hose with hot water and insert the connector, but be careful not to overheat the temperature to avoid damaging the hose;
- Please fully insert the serrated tail of the connector into the hose;
- Do not use a connector that can be pushed in once, as it may cause the hose to rupture.
5. Pressure control: Understand the pressure range of the nano-seepage tube and avoid using it beyond its pressure range to prevent rupture. When applying pressure, open/close any valve slowly to avoid impact pressure.
6. Anti-blockage: During use, try to avoid a large amount of impurities in the water to prevent clogging of the nano-pores of the seepage tube.
7. Regular inspection: Regularly check the working status of the nano-seepage tube to see if there is any leakage, blockage or damage. During the use of the hose, be sure to conduct regular inspections once a month. Before use, check the hose for any abnormalities (trauma, hardening, softening, discoloration, etc.).
8. Avoid external damage: Do not step on the hose with vehicles or other pressure, and do not put the hose in direct contact with or near open flames.
9. Cleaning and maintenance (if necessary): If cleaning is required after long-term use, choose the appropriate cleaning method according to the actual situation, but be careful not to use corrosive solutions such as strong acids and alkalis to avoid damaging the pipe.
There may be some differences in the rubber nano permeable hoses produced by different manufacturers. The specific usage method still needs to refer to the product instructions and related recommendations.
Yongte is professional manufacturer for rubber nano seepage pipe production machine, the rubber nano seepage pipe is made from recycled rubber material. we supply the rubber tire wastage recycling machine and the rubber nano seepage pipe extrusion machine.
